Altoona's Seismic Design Category, explained

Altoona carries Seismic Design Category B under USGS's ASCE 7-16 model. Low seismic hazard. Code requires basic seismic detailing (bracing, connections) but no special structural system restrictions. That puts Altoona in the 17th percentile nationally for seismic hazard - higher than 17% of the 4,875 US cities USGS was checked against here.

Where Altoona sits in Iowa

USGS's underlying values for Altoona: 0.03g peak ground acceleration, 0.062g at short period, 0.052g at 1 second. Within Iowa alone, Altoona ranks 41 of 85 cities by seismic hazard - the 52th percentile in-state. Altoona has a population of about 22,598.

What a retrofit costs in Altoona

A full earthquake retrofit typically runs $5,000-$10,000 nationally (around $7,000 typical), driven mainly by house size and foundation type, not by Iowa specifically. California's Earthquake Brace + Bolt grant, which covers a large share of this cost, is a California-only program and does not apply in Iowa.

Insuring against this, not just retrofitting

A Altoona homeowner cannot buy a standalone earthquake policy in most cases - it is added to an existing homeowners policy as an endorsement, so the place to start is a regular home-insurance quote.

Where Altoona's figures come from

Altoona's Category B and every number above trace to USGS's own ASCE 7-16 Design Maps service - see the methodology guide. See the category explainer for what Category B does and doesn't tell you about Altoona.