Livermore, CA: what USGS's seismic model says

USGS's ASCE 7-16 seismic design model - the same standard building codes use - places Livermore in Seismic Design Category D: High seismic hazard - this is the category most of coastal California, the Pacific Northwest, and other active fault regions fall into. Code mandates significant seismic detailing and restricts irregular structural configurations. This is the category the Brace + Bolt scope (cripple-wall bracing, foundation bolting) is built for. Nationally, Livermore ranks above 95% of the 4,875 cities in this dataset for seismic hazard - the 95th percentile.

Livermore by the numbers

The raw figures: peak ground acceleration 0.675g, short-period spectral response 1.654g, 1-second spectral response 0.6g. Among 429 California cities in this dataset, Livermore ranks 194 for seismic hazard, the 55th percentile within the state. About 84,867 people live in Livermore, California.

Retrofit economics for Livermore

Because Livermore is in California, the EBB grant applies if the ZIP code participates and the house qualifies (wood-framed house on a raised (not slab-on-grade) foundation, built before 1980): a $3,000-$7,000 bracing-and-bolting job drops to $0-$4,000 after the $3,000 base grant, or effectively free for income-eligible households getting the full $10,000.

Insuring against this, not just retrofitting

Earthquake coverage in California mostly runs through the California Earthquake Authority (CEA), sold only through licensed agents at CEA-participating insurers - there is no direct-to-consumer CEA policy. A general home-insurance quote is the practical starting point for a Livermore homeowner asking about it.

More on how this number was built

The methodology guide covers exactly how USGS's public design-maps API produced Livermore's numbers. The retrofit cost and grant guide covers every EBB eligibility rule, including the ones this page can't check.