Roseville's Seismic Design Category, explained

Under the seismic model IBC and ASCE 7 use for new construction, Roseville is Category C. Moderate seismic hazard. Code adds irregular-building restrictions and requires bracing of some nonstructural components (e.g. tall shelving, water heaters) in addition to structural detailing. Nationally, Roseville ranks above 77% of the 4,875 cities in this dataset for seismic hazard - the 77th percentile.

Where Roseville sits in California

The raw figures: peak ground acceleration 0.19g, short-period spectral response 0.447g, 1-second spectral response 0.223g. Among 429 California cities in this dataset, Roseville ranks 421 for seismic hazard, the 2th percentile within the state. About 163,304 people live in Roseville, California.

What a retrofit costs in Roseville

Because Roseville is in California, the EBB grant applies if the ZIP code participates and the house qualifies (wood-framed house on a raised (not slab-on-grade) foundation, built before 1980): a $3,000-$7,000 bracing-and-bolting job drops to $0-$4,000 after the $3,000 base grant, or effectively free for income-eligible households getting the full $10,000.

What this means for insurance

Earthquake coverage in California mostly runs through the California Earthquake Authority (CEA), sold only through licensed agents at CEA-participating insurers - there is no direct-to-consumer CEA policy. A general home-insurance quote is the practical starting point for a Roseville homeowner asking about it.

More on how this number was built

The methodology guide covers exactly how USGS's public design-maps API produced Roseville's numbers. The retrofit cost and grant guide covers every EBB eligibility rule, including the ones this page can't check.