Does Selinsgrove, PA need an earthquake retrofit?

Selinsgrove carries Seismic Design Category A under USGS's ASCE 7-16 model. Lowest seismic design category. Building code requires no seismic-specific detailing here beyond ordinary construction practice. That puts Selinsgrove in the 15th percentile nationally for seismic hazard - higher than 15% of the 4,875 US cities USGS was checked against here.

Where Selinsgrove sits in Pennsylvania

USGS's underlying values for Selinsgrove: 0.054g peak ground acceleration, 0.11g at short period, 0.041g at 1 second. Within Pennsylvania alone, Selinsgrove ranks 171 of 193 cities by seismic hazard - the 11th percentile in-state. Selinsgrove has a population of about 5,501.

Retrofit economics for Selinsgrove

A full earthquake retrofit typically runs $5,000-$10,000 nationally (around $7,000 typical), driven mainly by house size and foundation type, not by Pennsylvania specifically. California's Earthquake Brace + Bolt grant, which covers a large share of this cost, is a California-only program and does not apply in Pennsylvania.

Earthquake insurance for a Selinsgrove home

A Selinsgrove homeowner cannot buy a standalone earthquake policy in most cases - it is added to an existing homeowners policy as an endorsement, so the place to start is a regular home-insurance quote.

Where Selinsgrove's figures come from

Selinsgrove's Category A and every number above trace to USGS's own ASCE 7-16 Design Maps service - see the methodology guide. See the category explainer for what Category A does and doesn't tell you about Selinsgrove.